Overhead stacking door HERO
Description
Available as European tested and classified overhead stacking door.
Ideal door solution for installation situations with restricted room.
Special safety construction.
Product description
Door leaf
The door leaf is made out of 62 mm thick single elements (quantity and height depend on installation conditions). Door leaf thickness of 62 mm, surface of zincked 0,75 mm steel sheet with patched baffle plates and finger protection on both sides.
Guide rail
The guide rail consists of zinc-coated sheet steel in a screwed construction with fire protection isolation. The cover plates of the guide rail are a zincked construction with rubber profiles as “side handle protection”.
Redirection
Low-lintel redirection with a minimum header height of 740 mm is possible.
Control & drive
A specially coordinated drive and control system (micro-processor steered lock system) which has been approved by building control is employed.
Due to miscellaneous independently adjustable parameters in the control our overhead stacking door HERO can be run like standard industrial doors (see supplementary equipment).
Due to battery buffering the door will be held in its current position for at least four hours in case of a power outage. The control as well as all other safety devices continues to be active in case of fire.
Potentional-free contacts enable an operating condition query of the door.
An additional installation of a fire alarm system by customer is realisable by existing interfaces.
